Abstract-- This paper presents a UA V swarm system designed to assist first responders in disaster scenarios like wildfires. By distributing sensors across multiple agents, the system extends flight duration and enhances data availability, reducing the risk of mission failure due to collisions. T o mitigate this risk further, we introduce an autonomous navigation framework that utilizes a local Euclidean Signed Distance Field (ESDF) map for obstacle avoidance while maintaining swarm formation with minimal path deviation. Additionally, we incorporate a Traveling Salesman Problem (TSP) variant to optimize area coverage, prioritizing Points of Interest (POIs) based on preas-signed values derived from environmental behavior and critical infrastructure. The proposed system is validated through simulations with varying swarm sizes, demonstrating its ability to maximize coverage while ensuring collision avoidance between UA Vs and obstacles.

This paper presents the design of a gimballed rotor mechanism as a modular and efficient solution for constructing omnidirectional quadrotors. Unlike conventional quadrotors, which are underactuated, this class of quadrotors achieves full actuation, enabling independent motion in all six degrees of freedom. While existing omnidirectional quadrotor designs often require significant structural modifications, the proposed gimballed rotor system maintains a lightweight and easy-to-integrate design by incorporating servo motors within the rotor platforms, allowing independent tilting of each rotor without major alterations to the central structure of a quadrotor. To accommodate this unconventional design, we develop a new control allocation scheme in PX4 Autopilot and present successful flight tests, validating the effectiveness of the proposed approach.

Privacy-preserving distributed machine learning (ML) and aerial connected vehicle (ACV)-assisted edge computing have drawn significant attention lately. Since the onboard sensors of ACVs can capture new data as they move along their trajectories, the continual arrival of such 'newly' sensed data leads to online learning and demands carefully crafting the trajectories. Besides, as typical ACVs are inherently resource-constrained, computation- and communication-efficient ML solutions are needed. Therefore, we propose a computation- and communication-efficient online aerial federated learning (2CEOAFL) algorithm to take the benefits of continual sensed data and limited onboard resources of the ACVs. In particular, considering independently owned ACVs act as selfish data collectors, we first model their trajectories according to their respective time-varying data distributions. We then propose a 2CEOAFL algorithm that allows the flying ACVs to (a) prune the received dense ML model to make it shallow, (b) train the pruned model, and (c) probabilistically quantize and offload their trained accumulated gradients to the central server (CS). Our extensive simulation results show that the proposed 2CEOAFL algorithm delivers comparable performances to its non-pruned and nonquantized, hence, computation- and communication-inefficient counterparts.

MOMAV (Marco's Omnidirectional Micro Aerial Vehicle) is a multirotor drone that is fully actuated, meaning it can control its orientation independently of its position. MOMAV is also highly symmetrical, making its flight efficiency largely unaffected by its current orientation. These characteristics are achieved by a novel drone design where six rotor arms align with the vertices of an octahedron, and where each arm can actively rotate along its long axis. Various standout features of MOMAV are presented: The high flight efficiency compared to arm configuration of other fully-actuated drones, the design of an original rotating arm assembly featuring slip-rings used to enable continuous arm rotation, and a novel control allocation algorithm based on sequential quadratic programming (SQP) used to calculate throttle and arm-angle setpoints in flight. Flight tests have shown that MOMAV is able to achieve remarkably low mean position/orientation errors of 6.6mm, 2.1° (σ: 3.0mm, 1.0°) when sweeping position setpoints, and 11.8mm, 3.3° (σ: 8.6mm, 2.0°) when sweeping orientation setpoints.

Omnidirectional aerial vehicles (OMAVs) have opened up a wide range of possibilities for inspection, navigation, and manipulation applications using drones. In this paper, we introduce MorphEUS, a morphable co-axial quadrotor that can control position and orientation independently with high efficiency. It uses a paired servo motor mechanism for each rotor arm, capable of pointing the vectored-thrust in any arbitrary direction. As compared to the \textit{state-of-the-art} OMAVs, we achieve higher and more uniform force/torque reachability with a smaller footprint and minimum thrust cancellations. The overactuated nature of the system also results in resiliency to rotor or servo-motor failures. The capabilities of this quadrotor are particularly well-suited for contact-based infrastructure inspection and close-proximity imaging of complex geometries. In the accompanying control pipeline, we present theoretical results for full controllability, almost-everywhere exponential stability, and thrust-energy optimality. We evaluate our design and controller on high-fidelity simulations showcasing the trajectory-tracking capabilities of the vehicle during various tasks. Supplementary details and experimental videos are available on the project webpage.

Autonomous aerial robots are increasingly being deployed in real-world scenarios, where transparent glass obstacles present significant challenges to reliable navigation. Researchers have investigated the use of non-contact sensors and passive contact-resilient aerial vehicle designs to detect glass surfaces, which are often limited in terms of robustness and efficiency. In this work, we propose a novel approach for robust autonomous aerial navigation in unknown environments with transparent glass obstacles, combining the strengths of both sensor-based and contact-based glass detection. The proposed system begins with the incremental detection and information maintenance about potential glass surfaces using visual sensor measurements. The vehicle then actively engages in touch actions with the visually detected potential glass surfaces using a pair of lightweight contact-sensing modules to confirm or invalidate their presence. Following this, the volumetric map is efficiently updated with the glass surface information and safe trajectories are replanned on the fly to circumvent the glass obstacles. We validate the proposed system through real-world experiments in various scenarios, demonstrating its effectiveness in enabling efficient and robust autonomous aerial navigation in complex real-world environments with glass obstacles.

The integration of unmanned aerial vehicles (UAVs) into cellular networks presents significant mobility management challenges, primarily due to frequent handovers caused by probabilistic line-of-sight conditions with multiple ground base stations (BSs). To tackle these challenges, reinforcement learning (RL)-based methods, particularly deep Q-networks (DQN), have been employed to optimize handover decisions dynamically. However, a major drawback of these learning-based approaches is their black-box nature, which limits interpretability in the decision-making process. This paper introduces an explainable AI (XAI) framework that incorporates Shapley Additive Explanations (SHAP) to provide deeper insights into how various state parameters influence handover decisions in a DQN-based mobility management system. By quantifying the impact of key features such as reference signal received power (RSRP), reference signal received quality (RSRQ), buffer status, and UAV position, our approach enhances the interpretability and reliability of RL-based handover solutions. To validate and compare our framework, we utilize real-world network performance data collected from UAV flight trials. Simulation results show that our method provides intuitive explanations for policy decisions, effectively bridging the gap between AI-driven models and human decision-makers.

With the promise of greater safety and adaptability, modular reconfigurable uncrewed air vehicles have been proposed as unique, versatile platforms holding the potential to replace multiple types of monolithic vehicles at once. State-of-the-art rigidly assembled modular vehicles are generally two-dimensional configurations in which the rotors are coplanar and assume the shape of a "flight array". We introduce the Dodecacopter, a new type of modular rotorcraft where all modules take the shape of a regular dodecahedron, allowing the creation of richer sets of configurations beyond flight arrays. In particular, we show how the chosen module design can be used to create three-dimensional and fully actuated configurations. We justify the relevance of these types of configurations in terms of their structural and actuation properties with various performance indicators. Given the broad range of configurations and capabilities that can be achieved with our proposed design, we formulate tractable optimization programs to find optimal configurations given structural and actuation constraints. Finally, a prototype of such a vehicle is presented along with results of performed flights in multiple configurations.

ViVa-SAFELAND is an open source software library, aimed to test and evaluate vision-based navigation strategies for aerial vehicles, with special interest in autonomous landing, while complying with legal regulations and people's safety. It consists of a collection of high definition aerial videos, focusing on real unstructured urban scenarios, recording moving obstacles of interest, such as cars and people. Then, an Emulated Aerial Vehicle (EAV) with a virtual moving camera is implemented in order to ``navigate" inside the video, according to high-order commands. ViVa-SAFELAND provides a new, safe, simple and fair comparison baseline to evaluate and compare different visual navigation solutions under the same conditions, and to randomize variables along several trials. It also facilitates the development of autonomous landing and navigation strategies, as well as the generation of image datasets for different training tasks. Moreover, it is useful for training either human of autonomous pilots using deep learning. The effectiveness of the framework for validating vision algorithms is demonstrated through two case studies, detection of moving objects and risk assessment segmentation. To our knowledge, this is the first safe validation framework of its kind, to test and compare visual navigation solution for aerial vehicles, which is a crucial aspect for urban deployment in complex real scenarios.

Rapid response to natural disasters such as earthquakes is a crucial element in ensuring the safety of civil infrastructures and minimizing casualties. Traditional manual inspection is labour-intensive, time-consuming, and can be dangerous for inspectors and rescue workers. This paper proposed an autonomous inspection approach for structural damage inspection and survivor detection in the post-disaster building indoor scenario, which incorporates an autonomous navigation method, deep learning-based damage and survivor detection method, and a customized low-cost micro aerial vehicle (MAV) with onboard sensors. Experimental studies in a pseudo-post-disaster office building have shown the proposed methodology can achieve high accuracy in structural damage inspection and survivor detection. Overall, the proposed inspection approach shows great potential to improve the efficiency of existing manual post-disaster building inspection.